Xerox Phaser 3010, Service Manual

Page: 227 / 430

Phaser 3010/3040/WorkCentre 3045 Service Xerox Internal Use Only 4-17
Service Parts Disassembly
Phaser 3010/3040 Feeder
Feed Roll Assembly
PL2.2.1
1. Remove the Main Paper Tray (page 4-13).
2. Remove the Front Cover (page 4-15).
3. Remove the Rear Door (page 4-8).
4. Remove the Left Cover (page 4-16).
5. Remove the Right Cover (page 4-12).
6. Remove the Top Cover (page 4-7).
7. Remove the Rear Cover (page 4-11).
8. Remove the Toner Motor (page 4-37).
9. Remove the Toner Dispense Assembly (page 4-36).
10. Remove the Fuser (page 4-38).
11. Remove the Main Drive Assembly (page 4-40).
12. Remove the Main Drive Motor (page 4-41).
13. Remove the Power Switch Assembly (page 4-46).
14. Remove the MCU Board (page 4-43).
15. Remove the HVPS (page 4-42).
16. Remove the MCU Board bracket ().
17. Remove the IP Board (page 4-45).
18. Remove the LVPS (page 4-48).
19. Remove the IP Board and LVPS brackets (page 4-49).
20. Remove the Rear Door Interlock Switch (page 4-44).
21. Remove the xerographics assembly (page 4-33).
22. Remove the Feed Gear and Spring (page 4-25).