Xerox Phaser 3010, Service Manual

Page: 158 / 430

2-104 Xerox Internal Use Only Phaser 3010/3040/WorkCentre 3045 Service
Error Troubleshooting
Remain Registration Jam
Paper remaining at the registration section of the printer was detected.
Applicable Error
• 077-901: Remain Registration Jam
Initial Actions
• Check the media path for obstructions or debris.
• Cycle printer power.
• If the problem persists, use the following procedure.
Troubleshooting Reference Table
Applicable Parts Wiring and Plug/Jack Map References
■
Registration Sensor, PL2.3.10
■
MCU Board, PL7.1.3
■
“Map 1” on page 7-3
■
“Drive” on page 7-14
Troubleshooting Procedure Table
Step Actions and Questions Yes No
1 Test the Registration Sensor .
Does the Registration Sensor
function correctly?
Go to Step 2. Replace the
Registration
Sensor
(page 4-30).
2 Replace the MCU Board (page 4-43).
Does the error persist? Contact your
designated
field support for
assistance. Complete.