manualshive.com logo in svg

Xerox Legacy 4112, System Administration Manual

Overview: The Xerox Legacy 4112 is a cutting-edge printing system designed for high-speed, professional quality prints. Enhance your productivity with this exceptional device. Download the free user manual from our website for comprehensive instructions on utilizing all the advanced features of this remarkable product. manualshive.com

Share
Download
background image

Xerox 4112/4127 Copier/Printer System Administration Guide

I-6

 

Scan Size Defaults (system settings)  8-

130

Scanner (mail transmission)  . . 5-1, 5-2
Scanner (save to a computer)  . . . . . 5-1
Scanner (save to a mailbox)  . . . . . . 5-1
scanning   . . . . . . . . . . . . . . . . . . . . 6-11
Scan-to-FTP/SMB Defaults (system 

settings)  . . . . . . . . . . . . . . 8-129

Sending E-mails   . . . . . . . . . . . . . . 6-10
Server Name/IP address (system 

settings)  . . . . . . . . . . . . . . 8-160

Services and features  . . . . . . . . . . . 1-7
Set Numbering (system settings)    8-54, 

8-56

Setting an IP address   . . . . . . . . . . 1-13
Setting personal authentication 

information . . . . . . . . . . . . . 1-13

Setup Menu (system settings) . . . 8-146
Shared Name (SMB Only) (system 

settings)  . . . . . . . . . . . . . . 8-160

Sharpness (system settings)  . . 8-82, 8-

127

Sleep mode  . . . . . . . . . . . . . . . . . . 1-19
SLP - Active Discovery  . . . . . . . . . 3-10
SMB . . . . . . . . . . . . . . . . .2-5, 3-7, 5-10
SMB port  . 2-6, 2-8, 2-9, 5-8, 5-11, 5-13
SMTP   . . . . . . . . . . . . . . . . . . . . . . . 4-5
SMTP Authentication Password  . . 3-32
SMTP authentication user  . . . . . . . 3-32
SMTP Server Address . . . . . . . . . . 3-32
SMTP Server Settings (system settings) 

 . . . . . . . . . . . . . . . . . . . . . 8-108

SNMP   . . . . . . . . . . . . . . . . . . . . . . 3-14
SNMP port . . . . . . . . . . . . . . . . . . . 5-13
Software Download (system settings) 8-

66

Stamp Position (Side 1) (system 

settings)  . . . . . . . . . . . . . . . 8-92

Starting CentreWare Internet Services   

6-7

Store User Details (system settings)  . 8-

175

Stored Document Settings (System 

Settings)   . . . . . . . . . . . . . 8-143

Stored Programming Tone (system 

settings)  . . . . . . . . . . . . . . . 8-19

Subnet Mask . . . . . . . . . . . . .1-18, 3-12
Substitute Tray (system settings)  8-124
Supported frame types  . . . . . . . . . . 2-4
Supported interfaces   . . . . . . . . . . . 2-4
System Administrator Copy Meter 

(system settings) . . . . . . . 8-167

System Administrator Login ID (system 

settings)   . . . . . . . . . . . . . 8-170

System Administrator Password 

(system settings) . . . . . . . 8-171

System Administrator Settings (system 

settings)   . . . . . . . .8-170, 8-172

System Administrators  . . . . . . . . . . 7-1
System Manager Name  . . . . . . . . 3-15
system settings menu list  . . . .8-4, 10-1
System settings procedure  . . . . . . . 8-1

T

Tab Copying - Shift Value (system 

settings)   . . . . . . . . . . . . . . 8-96

TBCP Filter  . . . . .  3-8, 3-13, 3-17, 3-18
TCP/IP   . . . . . . . . . . . . . . . . . .2-1, 3-11
Text Effect (Background Pattern for Set 

Numbering)  . . . . . . . . . . . . 8-55

Text Effect (system settings) . . . . . 8-55
TIFF Format (system settings)  . . 8-135
Time (system settings)  . . . . . . . . . . 8-8
Time Zone (system settings)   . . . . 8-16
Time-Out . . . . . . . . . . . . . . . .3-17, 3-22
Transfer Protocol (system settings)   . 8-

160

Transport Protocol - Frame Type  . 3-10
Tray 5 (Bypass) Paper Size Defaults 

(system settings) . . . . . . . . 8-42

Tree Name  . . . . . . . . . . . . . . . . . . 3-10
types of authentication  . . . . . . . . . . 7-2
Types of Job Flow Sheet   . . . . . . . . 7-4
types of mailbox  . . . . . . . . . . . . . . . 7-8

U

Unauthenticated Users  . . . . . . . . . . 7-1
Unicode Support . . . . . . . . . . . . . . . 3-8
UNIX  . . . . . . . . . . . . . . . . . . . . . . . . 1-9
Unregistered Forms (system settings)  .

Summary of Contents for Legacy 4112













































































































































































































































































































































































Reviews:

No comments

Related manuals for Legacy 4112

Canon Pixma MG2400 Series Manual preview
Pixma MG2400 Series
Brand: Canon Pages: 2
Olivetti MB-2 Service Manual preview
MB-2
Brand: Olivetti Pages: 20
Olivetti JP 90 Service Manual preview
JP 90
Brand: Olivetti Pages: 63
Olivetti DP Technical Information Manual preview
DP
Brand: Olivetti Pages: 180
Olivetti d-Copia 600 Operation Manual preview
d-Copia 600
Brand: Olivetti Pages: 118
Olivetti d-Copia 200D Operation Manual preview
d-Copia 200D
Brand: Olivetti Pages: 80
Olivetti d-COLOR MF652 Operation Manual preview
d-COLOR MF652
Brand: Olivetti Pages: 253
Olivetti d-COLOR MF3300 Functions And Operating Instructions preview
d-COLOR MF3300
Brand: Olivetti Pages: 163
Olivetti d-COLOR MF222plus Quick Start Manual preview
d-COLOR MF222plus
Brand: Olivetti Pages: 151
Olivetti PGL 12EN Reference Manual preview
PGL 12EN
Brand: Olivetti Pages: 176
Raymarine e7 Installation And Operation Handbook preview
e7
Brand: Raymarine Pages: 135
Ricoh Lanier AP206 Setup Manual preview
Lanier AP206
Brand: Ricoh Pages: 406
Ricoh Aficio SP C240SF Firmware Update Manual preview
Aficio SP C240SF
Brand: Ricoh Pages: 14
Oki C7500n Maintenance Manual preview
C7500n
Brand: Oki Pages: 192
Oki ColorPainter M-64S User Manual preview
ColorPainter M-64S
Brand: Oki Pages: 84
Lexmark C53x Clearing Jams Manual preview
C53x
Brand: Lexmark Pages: 6
Printekmobile MLP-35 Quick Start Manual preview
MLP-35
Brand: Printekmobile Pages: 2
SIGN RACER 1600 LED Operation Manual preview
1600 LED
Brand: SIGN RACER Pages: 73

Brands by name

Popular brands

Load more brands