Xerox Legacy 4112, System Administration Manual

Page: 318 / 364

Xerox 4112/4127 Copier/Printer System Administration Guide 8-178
8. Setups
KEY POINT:
The setting of
Password Entry from Control
Panel
applies to functions occurring on the machine. If you
are using CentreWare Internet Services (or other external
access), a password is
ALWAYS
required regardless of the
password settings on the machine. Furthermore, a password
may be required depending on authentication methods set on
the machine in System Settings.
NOTE: The system administrator password is also used to
change settings from CentreWare Internet Services.
Charge / Private Print Settings
Set how received print jobs should be handled.
1. Select
Charge Print Settings
.
2.
Select the item to be set, and select
Change Settings
.
3. Set the setting value.
4.
Select
Save
.
PJL Receive Command
Control
Print jobs submitted by external equipment can be controlled by
PJL commands. The settings for
Receive Control
are applied
when either
Off
is selected or no PJL command is received.
PJL Output Command
Control
Print jobs submitted by an external equipment can be controlled
by PJL commands.
Receive Control
When using the authentication feature, set how to handle print
jobs for which authentication failed (the print driver did not provide
the correct UserID, password, and other authentication
information).
For information about printing from a print driver, refer to
Printing
on page 6-8
.