Xerox Legacy 4112 System Administration Manual Download Page 82

Page: 82 / 364

Xerox 4112/4127 Copier/Printer System Administration Guide

4-2

4. E-mail

Preparations

The following items are required in order to use the e-mail

feature. (Required items differ by the feature.)

: A required setting

: May set as needed for your

individual environment

Item

Description

Scanner Mail

Transmission

E-mail

Print

E-mail

notice

Job

completion

notice

TCP/IP

address

The TCP/IP address for the

machine.

E-mail is exchanged using TCP/IP.

Subnet

mask

Necessary when the network is

divided into subnets.

Gateway

address

Necessary when multiple networks

are connected by gateways.

Administrator

e-mail

address

Set the e-mail address for the

machine administrator.

Main mail

address

Used as the sender address when

the machine is transmitting e-mail.

DNS server

address

Required when the addresses for a

POP3 server and a SMTP server

are set with a domain name format

rather than their IP addresses.

SMTP server

address

The machine uses a SMTP server

to transmit e-mail. The SMTP

server can also be used for

receiving e-mail.

SMTP

authenticatio

n user

If the SMTP server requires

authentication, specify the

authentication user name.

POP3

server

If a POP3 server is used to receive

e-mails, register the e-mail address

of the machine and user to the

POP3 server.

Also, it is necessary to set the

POP3 server address on the

machine.

POP user

name

Set the POP receiving user

address.

Summary of Contents for Legacy 4112













































































































































































































































































































































































Search results

Summary of Contents for Legacy 4112

Reviews:

Related manuals for Legacy 4112

Brands by name

Popular brands

Xerox Legacy 4112, System Administration Manual

Search results

Summary of Contents for Legacy 4112

Reviews:

Related manuals for Legacy 4112

Brands by name

Popular brands