Xerox Legacy 4112 System Administration Manual Download Page 155

Page: 155 / 364

Xerox 4112/4127 Copier/Printer System Administration Guide

8-15

8. Setups

Auto Power Saver / Energy

In power saving mode, there is a "low-power mode" and a "sleep

mode," and when the set time has elapsed, the following occurs:
Last operation on the machine

Low-power mode

Sleep mode

From the

Machine Clock/Timers

screen, select

Auto Power

Saver / Energy

, and select

Change Settings

Set low-power mode and sleep mode.

•

From Last Selection to Low Power Mode:

Set the time

to go from last operation to low-power mode. Set the time

from 1 to 240 minutes, in 1 minute increments.

NOTE: The time From Last Operation to Low-power Mode
must not exceed the time From Last Operation to Sleep
Mode.

•

From Last Selection to Sleep mode:

Summary of Contents for Legacy 4112













































































































































































































































































































































































Search results

Summary of Contents for Legacy 4112

Reviews:

Related manuals for Legacy 4112

Brands by name

Popular brands

Xerox Legacy 4112, System Administration Manual

Search results

Summary of Contents for Legacy 4112

Reviews:

Related manuals for Legacy 4112

Brands by name

Popular brands