Xerox Legacy 4112, System Administration Manual

Page: 311 / 364

Xerox 4112/4127 Copier/Printer System Administration Guide
8-171
8. Setups
3.
Select
Keyboard
, then in
New System Administrator Login
ID
, enter the system administrator ID, and select
Save
.
4.
Select
Keyboard
once more, and in
Re-enter System
Administrator Login ID
, enter the same system administrator
ID, and select
Save
.
5.
Select
Save
.
System Administrator Passcode
Set the password for System Administration mode.
KEY POINT:
This is recommended for stronger security.
NOTE: The default setting of the system administrator passcode
is x-admin.
The
System Administrator Passcode
appears in the
Login
Setup/Auditron Administration
operation after
Yes
is selected
for using a password. Set the password after setting the system
administrator UserID. The passcode can be from 4-12 numeric
digits.
For more about enabling and disabling passwords, refer to
Accounting on page 8-162
.
1.
Select
System Administrator Passcode
.
2.
Select
Keypad
.
3.
Select
Keyboard
to enter the new password from 4-12
numeric digits in
New Passcode
, and select
Next
.
4. In
Re-enter Passcode
, enter the same password, and select
Save
.
NOTE: To set no passcode, leave the passcode blank, and
select Save.