Xerox Legacy 4112 System Administration Manual Download Page 69

Page: 69 / 364

Xerox 4112/4127 Copier/Printer System Administration Guide

3-21

3. Using CentreWare Internet Services

12.

Set the

LDAP Authentication

information.

13.

Click

LDAP Group Access

14.

Set the

LDAP Group Access

information.

15.

Click

Custom Filters

16.

Set the

Custom Filters

information.

17.

Reflect the values as the machine’s setting values.

a. Click the

Apply New Settings

. A screen to enter the user

name and password will be displayed.

b. Enter the System Administrator UserID and password into

User Name

and

Password

, and then click

NOTE: The default User ID value is 11111 and password is
x-admin.

c. The right frame on the web browser will change to the

machine reboot display.

18.

Click

Reboot

. The machine will reboot and the setting value

will be reflected.

Summary of Contents for Legacy 4112













































































































































































































































































































































































Search results

Summary of Contents for Legacy 4112

Reviews:

Related manuals for Legacy 4112

Brands by name

Popular brands

Xerox Legacy 4112, System Administration Manual

Search results

Summary of Contents for Legacy 4112

Reviews:

Related manuals for Legacy 4112

Brands by name

Popular brands