Xerox Legacy 4112 System Administration Manual Download Page 123

Page: 123 / 364

Xerox 4112/4127 Copier/Printer System Administration Guide

7-1

Authentication & Auditron
Administration

Authentication overview

Users controlled by Authentication

The Authentication feature restricts operations according to the

user type. Users are classified into the following four types.
•

System Administrators

•

Authenticated Users

•

Unauthenticated (unregistered) Users

•

General Users

System Administrators

System Administrators are special users who can enter and

change system settings.
To enter System Administration mode, enter the System

Administrator ID into the user ID entry field on the authentication

screen.

Authenticated Users

Authenticated users are users who are registered with the

machine.
When an authenticated uses a service that is restricted, the user

must enter their user ID on the authentication screen.

Unauthenticated

(unregistered) Users

Unauthenticated (unregistered) users are users who are not

registered with the machine.
An unauthenticated (unregistered) users cannot use services that

are restricted.

General Users

General users are those who are not permitted to use the machine

in the authenticated mode.

Summary of Contents for Legacy 4112













































































































































































































































































































































































Search results

Summary of Contents for Legacy 4112

Reviews:

Related manuals for Legacy 4112

Brands by name

Popular brands

Xerox Legacy 4112, System Administration Manual

Search results

Summary of Contents for Legacy 4112

Reviews:

Related manuals for Legacy 4112

Brands by name

Popular brands