Xerox Legacy 4112 System Administration Manual Download Page 127

Page: 127 / 364

Xerox 4112/4127 Copier/Printer System Administration Guide

7-5

7. Authentication & Auditron Administration

Personal job flow sheet

This job flow sheet is created by an authentication registered user

when the Authentication feature is being used.
Such a job flow sheet can only be used by the authentication-

registered user who created it.
When the Authentication feature is not enabled, a personal job

flow sheet can only be run by the System Administrator.
How job flow sheets can be used on the machine depend on

whether or not the Authentication feature is used.

When the Authentication feature is not enabled

When the Authentication feature is not enabled, the relation

between the users and the use of a job flow sheet is as follows.
For job flow sheet operation, the operations that can be used are

different for a job flow sheet created in the

Mailbox

screen, and a

job flow sheet created in the

Job Flow Sheets

screen.

Mailbox Screen

This section describes operations that can be used from the

Mailbox screen of the machine.

* The owner of a copied job flow sheet is the user who made the copy.

KEY POINT 1:

A job flow sheet created from

Check Mailbox

allows editing, copying, deletion, and selection/execution only

from the mailbox in which the job flow sheet was created. The

users are any and all users who are able to use the mailbox.

KEY POINT 2:

If a job flow sheet is associated with a mailbox in

which it can no longer be used as a result of a change in the

authentication status, then editing and copying are no longer

possible, but the job flow sheet can still be used. However, once

the association is released, the job flow sheet is no longer

displayed, and cannot be used.

Job flow

sheet

operation

General users

System Administrator

Generally

shared

Box

Administrator

shared

Personal Generally

shared

Box

Administrator

shared

Personal

Creation/

registration

Yes

Display

Yes

Editing

Yes

Copying

Yes

Deletion

Yes

Selection/

execution

Yes

Associating

with mailbox

Yes

Summary of Contents for Legacy 4112













































































































































































































































































































































































Search results

Summary of Contents for Legacy 4112

Reviews:

Related manuals for Legacy 4112

Brands by name

Popular brands

Xerox Legacy 4112, System Administration Manual

Search results

Summary of Contents for Legacy 4112

Reviews:

Related manuals for Legacy 4112

Brands by name

Popular brands