![background image](http://html1.mh-extra.com/html/xerox/docucolor-250/docucolor-250_online-help-manual_3705917296.webp)
P r o d u c t N a m e B o o k N a m e
- 8
5. Select the desired unit of measure (dpi, mm, inches).
6. Select a Shift Option.
•
Independent: Select an independent vertical or horizontal
shift for both sides 1 and 2.
•
Auto-Center: Automatically centers the image on the page.
•
Mirror: The horizontal and vertical image shift for both
sides move in opposite directions from each other. Mirror is
best used for two sided jobs.
•
Mirror X only: The horizontal shift for both sides moves in
opposite directions. The vertical shift for both sides
remains independent.
•
Mirror Y only: The vertical shift for both sides moves in
opposite directions. The horizontal shift for both sides
remains independent.
•
Tandem: The horizontal and vertical shift move in the
same direction for both sides.
•
Tandem X only: The horizontal shift for both sides moves
in the same direction. The vertical shift remains
independent for both sides.
•
Tandem Y only: The vertical shift for both sides moves in
the same direction. The horizontal shift remains
independent for both sides. Tandem is best used for head-
to-toe jobs.
7. Using the X and Y axis, enter a shift value by using the spin
box or by typing in a number.
•
When selecting the horizontal (X) image shift, enter a
positive number to move the printed image away from the
left side of the paper. Enter a negative number to move the
printed image away from the right side of the paper.
•
When selecting the vertical (Y) image shift, a enter a
positive number to move the printed image upward and a
negative number to move the printed image down.
•
Use the Center option to bring both the X and Y values
back to zero (no shift).
NOTE: This list describes the shift behavior on side one. The
shift behavior of side two is determined by the Shift Option
selected in Step 6.
8. Click OK to close the dialog, or continue setting job properties.
Your selection will display on the Image Shift FAB.
Rotation FAB
Use rotation to turn a page image 180 degrees from its current
position (0 degrees represents no rotation). You may need to
rotate a page image so that it will print properly when processed
by a finishing device (for example, to allow for right-side stitching
Summary of Contents for DocuColor 250
