Well W52P Page 2 User Manual Download

Page: 2 / 162

publication may be reproduced or transmitted in any form or by any means, electronic or

mechanical, photocopying, recording, or otherwise, for any purpose, without the express

written permission of Yealink Network Technology CO., LTD. Under the law, reproducing includes

translating into another language or format.

When this publication is made available on media, Yealink Network Technology CO., LTD. gives

its consent to downloading and printing copies of the content provided in this file only for

private use and not for redistribution. No parts of this publication may be subject to alteration,

modification or commercial use. Yealink Network Technology CO., LTD. will not be liable for any

damages arising from use of an illegally modified or altered publication.

Warranty

THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS GUIDE ARE SUBJECT

TO CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN

THIS GUIDE ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT WARRANTY OF ANY

KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF

PRODUCTS.

YEALINK NETWORK TECHNOLOGY CO., LTD. MAKES NO WARRANTY OF ANY KIND WITH REGARD

TO THIS GUIDE, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY

AND FITNESS FOR A PARTICULAR PURPOSE. Yealink Network Technology CO., LTD. shall not be

liable for errors contained herein nor for incidental or consequential damages in connection

with the furnishing, performance, or use of this guide.

Declaration of Conformity

Hereby, Yealink Network Technology CO

LTD. declares that this phone is in conformity with the essential

requirements and other relevant provisions of the CE, FCC.

CE Mark Warning

This device is marked with the CE mark in compliance with EC Directives 1999/5/EC (R&TTE).

This device complies with the following standards:

1. Safety: EN 60950-1:2006+A11:2009+A1:2010+A12:2011

2. SAR: EN62479:2010

3. EMC: ETSI EN 301 489-1 V1.9.2 (2011-09) & ETSI EN 301 489-6 V1.3.1 (2008-08)

4. Radio: ETSI EN 301 406 V2.1.1 (2009-07)

Summary of Contents for W52P



































































































































































Search results

Summary of Contents for W52P

Reviews:

Related manuals for W52P

Brands by name

Popular brands

Well W52P, User Manual

Search results

Summary of Contents for W52P

Reviews:

Related manuals for W52P

Brands by name

Popular brands