Well W52P User Manual Download Page 68

Page: 68 / 162

User Guide W52P IP DECT Phone

To configure fast access for voice mail:

You can configure fast access to connect straight to the voice mails of the desired line

by long pressing the digit key 1, when the handset is idle without having to scroll through

the menu.

Press to enter the main menu.

Select ->

Set Key 1

The LCD screen displays the lines assigned to the handset as incoming lines and

outgoing lines simultaneously, and the number of voice mails of each line.

Press

to highlight the desired line and press the

Select

soft key.

The radio box of the selected line is marked.

To listen to the voice mail using the menu:

Press the

key to enter the main menu.

Select

Play Message

The LCD screen displays the lines assigned to the handset as incoming lines and

outgoing lines simultaneously, and the number of voice mails of each line.

Press

to highlight the desired line, and press the

Select

soft key.

The handset dials out the voice mail access code using the selected line

automatically.

Listen to the voice mail following the voice prompts from the system server.

To listen to the voice mail via fast access:

Long press when the handset is idle.

The handset automatically dials out the voice mail access code using the line you

selected when configuring fast access for voice mail.

Listen to the voice mail of this line following the voice prompts from the system

server.

You can also listen to the voice mail by pressing to enter into the Message & Call

interface. Select the desired line and press the

Select

soft key.

Note

Before listening to the voice mails, make sure the voice mail access code has been
configured.

When all new voice mails are retrieved, the

icon disappears from the screen.

Summary of Contents for W52P



































































































































































Search results

Summary of Contents for W52P

Reviews:

Brands by name

Popular brands

Well W52P, User Manual

Search results

Summary of Contents for W52P

Reviews:

Brands by name

Popular brands