Well W52P User Manual Download

Page: 31 / 162

Basic Operations

To switch the silent mode on:

Long press

until the LCD screen prompts the message “All Ring Tones Off”.

The silent mode is on. The icon appears on the idle screen.

To switch the silent mode off:

Long press

again until the LCD screen prompts

the message “All Ring Tones

On”.

The silent mode is off. The icon

disappears from the idle screen.

Menu Guidance

The handset provides a variety of features that are grouped into menu. This section

provides you with some basic guidance of accessing and navigating the menu.

Main

Main M

enu

The handset menu has a number of levels. The main menu is the top-level menu, which

consists of six main menu features: Status, Intercom, Voice Mail, Call Features, Directory

and Settings.

To enter the main menu:

Press when the handset is

idle.

The main menu features are shown on the LCD screen as a list of icons.

To access a main menu feature:

Press

scroll through the main menu feature list.

The name of the selected main menu feature displays on the top of the LCD screen.

Press or the

soft key to enter the corresponding submenu.

Sub

Subm

enu

The submenu features display on the LCD screen and they are shown as a list. You can

access the desired submenu feature by selecting the corresponding submenu.

Intercom

Call Features

Settings

Status

Voice Mail

Summary of Contents for W52P



































































































































































Search results

Summary of Contents for W52P

Reviews:

Related manuals for W52P

Brands by name

Popular brands

Well W52P, User Manual

Search results

Summary of Contents for W52P

Reviews:

Related manuals for W52P

Brands by name

Popular brands