Well W52P User Manual Download

Page: 150 / 162

User Guide W52P IP DECT Phone

Anonymous Call Rejection

You can use anonymous call rejection feature to reject incoming calls from anonymous

callers. Anonymous call rejection automatically rejects

incoming calls from callers who

deliberately block their identities and numbers from showing up. You can configure the

anonymous call rejection feature on a per-line basis.

To enable the anonymous call rejection feature for a specific line:

Press to enter the main menu.

Select

Anon.Call Rejection

The LCD screen displays the incoming lines currently assigned to the handset.

Press

to highlight the desired line, and press the

soft key.

Press

to select

Enabled

from the

Status

field.

10.

Press the

soft key to accept the change.

Voice Mail

You can leave voice mails to someone else. You can also receive and listen to the

voice mails. The voice mail feature ensures that you will never miss any important

messages. When receiving a new voice mail, the icon appears on the LCD screen

with the number of unread voice mails and the message key LED flashes red.

Note

To leave a voice mail:

You can leave a voice mail to someone else when he or she is busy or inconvenient to

answer the call. Follow the voice prompts from the system server to leave a voice mail,

and then hang up after completing.

To configure the voice mail access code:

Press to enter the main menu.

Select ->

Set Voice Mail

The LCD screen displays the lines assigned to the handset as incoming lines and

outgoing lines simultaneously, and the number of voice mails of each line.

Press or to highlight the desired line, and press the

Select

soft key.

10.

Press

to select

Enabled

from the

Status

field.

11.

Enter the voice mail access code in the

Number

field.

12.

Press the

soft key to accept the change or the

Back

soft key to cancel.

The voice mail feature is not available on all servers. Contact your system administrator
for more information.

Summary of Contents for W52P



































































































































































Search results

Summary of Contents for W52P

Reviews:

Related manuals for W52P

Brands by name

Popular brands

Well W52P, User Manual

Search results

Summary of Contents for W52P

Reviews:

Related manuals for W52P

Brands by name

Popular brands