Well W52P User Manual Download

Page: 145 / 162

Call Features

To un-mute a call:

Press

again.

The icon disappears from the LCD screen.

Call Hold/Resume

You can place an active call on hold. At any time, at most one active call can be in

progress on your handset. Another call can be answered and made while placing the

original call on hold.

To place a call on hold:

Press the

Options

soft key during a call, and select

Hold

The call is placed on hold and the icon displays on the LCD screen.

To resume a hold call:

Do one of the following:

Press the

Resume

soft key.

Press

Two Calls on Hold:

If two calls are placed on hold on the handset, press the

Resume

soft key to resume the

current call. Press

or the

Swap

soft key to swap between the two calls.

Note

Call Waiting

You can enable or disable the call waiting feature on the handset. If the call waiting

feature is enabled, the handset will notify you of a new incoming call during a call, and

present the incoming call information visually on the LCD screen. You can also enable

the handset to play a warning tone when receiving a new incoming call during a call. If

the call waiting feature is disabled, the new incoming call will be automatically

rejected by the handset.

To configure the call waiting feature:

Press to enter the main menu.

Select

Call Waiting

Press

or to select the desired value from the

Status

field.

When the call on the handset is on hold, placing the handset in the charger cradle will
not end the call.

Summary of Contents for W52P



































































































































































Search results

Summary of Contents for W52P

Reviews:

Related manuals for W52P

Brands by name

Popular brands

Well W52P, User Manual

Search results

Summary of Contents for W52P

Reviews:

Related manuals for W52P

Brands by name

Popular brands