Well W52P User Manual Download

Page: 72 / 162

User Guide W52P IP DECT Phone

Appendix

Firmware Upgrading

You can upgrade your base station or handset to the latest firmware version. The latest

firmware version not only improves the performance of the base station or handset, but

also provides more features compared to the previous versions.

Upgrading the Base Station

You can upgrade the base station firmware via auto provisioning or via the web user

interface. This section provides you with the instruction of upgrading the base station via

the web user interface. For more information on upgrading the base station via auto

provisioning, refer to the document WELL

W52P Auto Provisioning User Guide

To upgrade the base station firmware, contact your system administrator for the latest

firmware file, and store it on your local system.

To upgrade the base station firmware via web user interface:

Click on

Phone

Upgrade

In the

Select and Upgrade Firmware

field, locate the firmware file from your local

system.

Click

Upgrade

to upgrade the firmware of the base station.

The upgrading process will take a few minutes. The power indicator LED on the base

station slow flashes when the base station is during the firmware upgrading process.

Once the base station firmware has been successfully upgraded, the base station

reboots automatically. The handset will perform an auto registration to the base station.

You can check the firmware version of the base station using the handset. For more

information, refer to

Checking System Status

on page

Note

Upgrading the Handset

Upgrading the Handset via USB Port

via USB Port

You can upgrade your handset firmware via the USB port located underneath the

battery cover. USB ports allow standalone electronic devices to be connected via

cables to a computer.

To upgrade the handset firmware, contact your system administrator for the latest

Do not refresh or close the browser during the upgrading process of the base station.

Summary of Contents for W52P



































































































































































Search results

Summary of Contents for W52P

Reviews:

Related manuals for W52P

Brands by name

Popular brands

Well W52P, User Manual

Search results

Summary of Contents for W52P

Reviews:

Related manuals for W52P

Brands by name

Popular brands