Well W52P User Manual Download

Page: 33 / 162

Basic Operations

To access a submenu feature:

Press

to highlight the desired submenu.

Press or the

soft key to access the

next menu level.

You can cancel the current operation and return to the previous menu level by

pressing or the

Back

soft key.

Returning to Idle Screen

To return to the idle screen:

Long press to quickly exit the menu and return to the idle screen.

If you do not press any key in a period of time, the LCD screen will automatically exit the

menu and return to the idle status.

Note

If you are navigating the menu, and an incoming call arrives, the LCD screen will
automatically exit the menu and the call will be handled as usual. When the call is
terminated, the LCD screen returns to the idle status.

Summary of Contents for W52P



































































































































































Search results

Summary of Contents for W52P

Reviews:

Related manuals for W52P

Brands by name

Popular brands

Well W52P, User Manual

Search results

Summary of Contents for W52P

Reviews:

Related manuals for W52P

Brands by name

Popular brands