Well W52P User Manual Download

Page: 53 / 162

Phone Settings

Speed Dial

Speed dial allows you to perform single-digit dialing to predefined numbers. This feature

is particular useful to users who dial certain numbers on regular basis. A maximum of 8

speed dial numbers are allowed.

Assigning a Speed Dial Number

You can assign the important numbers of your directory (including local directory,

remote phonebook and network directory) to the speed dial keys of your handset. This

helps you dial a contact quickly and easily by long pressing the speed dial key without

having to enter the directory. The available speed dial keys are the digit keys 2-9.

To assign a speed dial number from the directory:

Press to enter the main menu.

Select ->

Telephony

Speed

Dial

The LCD screen displays all available speed dial keys.

Press or to highlight the desired speed dial key, and press the

Assign

soft

key.

Press or to highlight the desired directory.

Select the desired contact from the directory.

Do one of the following:

If only one number of the contact is stored in the selected directory, press the

soft key to assign the number to the selected speed dial key.

If both the office number and the mobile number of the contact are stored in

the selected directory, press the

soft key to display the two numbers.

Press

to highlight the desired number.

Press the

soft key again to assign the number to the selected speed dial key.

Deleting

Deleting a

a Speed Dial

Speed Dial

Speed Dial Number

Number

To delete a speed dial number:

Press to enter the main menu.

Select ->

Telephony

Speed

Dial

The LCD screen displays all available speed dial keys.

Press or to highlight the desired speed dial key, which is already assigned

a number.

Press

or the

Clear Key

soft key to delete the speed dial number.

Summary of Contents for W52P



































































































































































Search results

Summary of Contents for W52P

Reviews:

Related manuals for W52P

Brands by name

Popular brands

Well W52P, User Manual

Search results

Summary of Contents for W52P

Reviews:

Related manuals for W52P

Brands by name

Popular brands