Well W52P, User Manual

Page: 62 / 162

User Guide W52P IP DECT Phone
50
To un-mute a call:
1. Press again.
The icon disappears from the LCD screen.
Call Hold/Resume Call Hold/Resume Call Hold/Resume Call Hold/Resume
You can place an active call on hold. At any time, at most one active call can be in
progress on your handset. Another call can be answered and made while placing the
original call on hold.
To place a call on hold:
1. Press the Options soft key during a call, and select Hold .
The call is placed on hold and the icon displays on the LCD screen.
To resume a hold call:
Do one of the following:
- Press the Resume soft key.
- Press .
- Press .
Two Calls on Hold:
If two calls are placed on hold on the handset, press the Resume soft key to resume the
current call. Press , or the Swap soft key to swap between the two calls.
Note
Call Waiting
Call Waiting Call Waiting
Call Waiting
You can enable or disable the call waiting feature on the handset. If the call waiting
feature is enabled, the handset will notify you of a new incoming call during a call, and
present the incoming call information visually on the LCD screen. You can also enable
the handset to play a warning tone when receiving a new incoming call during a call. If
the call waiting feature is disabled, the new incoming call will be automatically
rejected by the handset.
To configure the call waiting feature:
1.
Press to enter the main menu.
2. Select -> Call Waiting .
3. Press or to select the desired value from the Status field.
When the call on the handset is on hold, placing the handset in the charger cradle will
not end the call.