Well W52P, User Manual

Page: 132 / 162

User Guide W52P IP DECT Phone
38
The LCD screen displays all entries of the selected list.
7.
Press or to highlight the desired entry.
8. Press .
Dial Plan Dial Plan Dial Plan Dial Plan
Dial plan is a string of characters that governs the way your handset processes the
inputs received from your handset keypad. The handset supports the following dial plan
features:
Replace Rule
Area Code
Block Out
The basic expression syntax you need to know:
.
The dot “.” can be used as a placeholder or multiple placeholders for any
character. Example:
“12.” would match “12 3 ”, “12 34 ”, “12 345 ”, “12 abc ”, etc.
x
An “x” can be used as a placeholder for any character. Example:
“12x” would match “12
1
”, “12
2
”, “12
3
”, “12
a
”, etc.
[]
The square brackets “[]”can be used as a placeholder for a single character
which matches any of a set of characters. Example:
“91[5-7]1234” would match “91
5
1234”, “91
6
1234”, “91
7
1234”, etc.
()
The parentheses “( )”can be used to group together patterns, for instance, to
logically combine two or more patterns. Example:
“91([5-7])1(x)” would match “91 5 1 1 ”, “91 6 1 8 ”, “91 7 1 5 ”, etc.
$
The “$” should be followed by the sequence number of a parenthesis. The
“$” plus the sequence number means the whole character or characters
placed in the parenthesis. The number directs to the right parenthesis when
there are more than one. Example:
A replace rule configuration: Number: “9([5-7]) (.)”, Replace: “5$2”. When
you enter “96123” to dial out on your phone, the number will be replaced as
“5123” and then dialed out. “$2” means the characters in the second
parenthesis, that is, “123”.
Note
When adding a dial plan rule, you can specify the accounts to apply the dial plan rule in
the
Account field. The valid value of the “Account” parameter can be one or more
digits among 1, 2, 3, 4 and 5, each of which represents a line ID. Each digit must be
separated by a comma. For example, when you enter the value “1, 2” in the
Account
field, this dial plan rule will apply to account1 and account2.
If you leave the
Account
field blank or enter an invalid value, then the dial plan rule will
apply to all accounts.