Well W52P User Manual Download

Page: 109 / 162

Basic Operations

11.

Press the

Done

soft key.

12.

Press

to select

Static

from the

Address

Type

field.

13.

Enter the valid values in the

IP Address

Subnet Mask

Default Gateway

Primary DNS

and

Secondary DNS

fields.

14.

Press the

Save

soft key to accept the change.

If you are using an xDSL modem, you can connect your base station to the Internet via

PPPoE mode. The PPPoE port will perform a PPP negotiation to obtain the IP address.

Contact your system administrator for the PPPoE username and password.

To configure PPPoE:

Press to enter the main menu.

Select ->

System Settings

Network

10.

Enter the system PIN (default: 0000).

11.

Press the

Done

soft key.

12.

Press

to select

PPPoE

from the

Address

Type

field.

13.

Enter the valid values in the

PPPoE User

and

PPPoE Password

fields.

14.

Press the

Save

soft key to accept the change.

Note

Checking System

Checking System Status

Status

You can view the system status on your handset. Available information of the system

status includes:

General information

—including the IP address, MAC address, firmware version and

RFPI code of the base station.

Network status

—including the IP type, subnet mask, gateway, primary DNS and

secondary DNS.

Handset status

—including the device model, hardware version, firmware version,

product ID, IPUI code and area of the handset.

To check the general information:

Press to enter the main menu.

Select ->

System

Status

The LCD screen displays the general information and the

More…

option.

Press

to scroll through the list and view the specific information.

Using the wrong network parameters may result in inaccessibility of your phone and may
also have an impact on your network performance. For more information about these
parameters, contact your system administrator.

Summary of Contents for W52P



































































































































































Search results

Summary of Contents for W52P

Reviews:

Related manuals for W52P

Brands by name

Popular brands

Well W52P, User Manual

Search results

Summary of Contents for W52P

Reviews:

Related manuals for W52P

Brands by name

Popular brands