Well W52P User Manual Download Page 65

Page: 65 / 162

Call Features

To perform a semi-attended transfer:

Press the

Options

soft key during a call, and select

Transfer

Do one of the following:

Enter the number or select the handset you want to transfer the call to.

Press or the

Transfer

soft key to dial out.

Press the

Directory

soft key, and select the desired contact.

Press the

Call

soft key.

If both the office number and the mobile number of the contact are stored,

select the desired number and press or the

soft key to dial out.

Press or the

Transfer

soft key to complete the transfer when receiving the

ring-back.

The LCD screen prompts the message “Call Transferred”.

To perform an attended transfer:

Press the

Options

soft key during a call, and select

Transfer

Do one of the following:

Enter the number or select the handset you want to transfer the call to.

Press or the

Transfer

soft key to dial out.

Press the

Directory

soft key, and select the desired contact.

Press the

Call

soft key.

If both the office number and the mobile number of the contact are stored,

select the desired number and press or the

soft key to dial out.

Press the

Transfer

soft key to complete the transfer after the party answers the call.

The LCD screen prompts the message “Call Transferred”.

Conference Call

You can use the handset to create a local conference with other parties. The handset

supports up to 3 parties (including yourself) in a conference call. You can create a

conference between an active call and a held call on the handset (on the same line or

different lines).

To set up a local conference call:

Place a call to the first party.

Press the

Options

soft key, and select

Conference

Do one of the following:

Enter the number of the second party or select the handset you want to add to

the conference.

Press or the

Conf.

soft key to dial out.

Summary of Contents for W52P



































































































































































Search results

Summary of Contents for W52P

Reviews:

Brands by name

Popular brands

Well W52P, User Manual

Search results

Summary of Contents for W52P

Reviews:

Brands by name

Popular brands