Well W52P User Manual Download

Page: 103 / 162

Overview

Hardware component instructions of the W52P/W52H handset are:

Item

Description

①

Earpiece

Outputs audio during the earpiece call.

②

LCD Screen

Shows call information, handset status icons, prompt

messages and so on.

③

Soft Keys

Label automatically to identity their context-sensitive

features.

④

Speakerphone Key

Switches between the earpiece and speakerphone

modes.

Answers an incoming call.

⑤

Headset Connector Connects a headset.

⑥

Off-hook Key

Answers an incoming call.

Enters into the redial call list.

Places a call.

⑦

Keypad

Provides the digits, letters, and special characters in

context-sensitive applications.

⑧

Star Key

Enters the star symbol.

Switches the silent mode on or off.

⑨

Redirect Key

Transfers a call to another party.

⑩

Microphone

Picks up audio during earpiece and hands-free calls.

⑪

Mute Key

Toggles the Mute feature on or off.

⑫

Pound Key

Enters the pound symbol.

Locks or unlocks the handset keypad.

Switches the input method.

⑬

On-hook

Key/Power key

Long press to return to the idle screen in the menu

mode.

Long press to turn the handset on or off when the

handset is idle.

Cancels actions or end a call.

Rejects an incoming call.

⑭

Message Key

Indicates the new receiving voice mail or missed call.

Accesses the voice mail or missed call list.

Indicates the handset is during the firmware upgrading

process.

⑮

Scroll through the displaying information.

Move the cursor.

Adjust the ringer volume.

Act as shortcut keys.

Confirms actions or enter into the main menu.

Summary of Contents for W52P



































































































































































Search results

Summary of Contents for W52P

Reviews:

Related manuals for W52P

Brands by name

Popular brands

Well W52P, User Manual

Search results

Summary of Contents for W52P

Reviews:

Related manuals for W52P

Brands by name

Popular brands