Watkiss Vario, Operating Manual

Page: 60 / 110

56
The sidelays should be positioned so that their outer edge
aligns with the inner edge of the guide mark. The dotted
lines in the illustration indicate the correct alignment of
the sidelay with the guide mark.
STRAIGHT STACKING For straight stacking the appropriate solid guide marks
are used for both sidelays.
OFFSET STACKING For offset stacking the position of the left sidelay is the
same as for straight stacking. The right sidelay must be
aligned with the corresponding unfilled guide mark on the
right side of the stacker tray.
Select
OSCILLATE
in the
BASIC
window to enable the
oscillating function. Batch offsetting is also available by
selecting
OSCILLATE
in the
BATCH
window.
The sidelays' position can be adjusted during initial col-
lating if necessary to ensure neat stacking.
Important
Ensure the sidelay anti-static cables (see p.55) are
connected to the paper tray.
Sidelay
Guide Mark
Paper Size Shown here
Sidelay and Guide Mark Alignment