Watkiss Vario, Operating Manual

Page: 47 / 110

43
LOADING Loading Sequence
There are two loading methods. Which one you use will
depend upon the job in question and whether the sets
are delivered to the front or rear of the machine.
1. Load the sheets face
up and with the first
page in the uppermost
bin to give face up de-
livery to the rear or face
down delivery to the
front.
2. Load the sheets face
down and with the first
page in the bottom bin
to give face down deliv-
ery to the rear or face
up delivery to the front.
For on-line booklet making at the rear of a bench top
machine, use method 1.
When using the Vario rear corner stapler, use method 2,
with the corner to be stapled loaded outermost.
Loading the Bins
Normally the trays are all in the up position, in order to
load the bins they must first be lowered. Starting with the
bottom bin (bin 1), press the grey bin lowering button and
then load the bin, lower bin 2 and load it, lower bin 3 and
load it etc.. In this way the gap between the bins is
maximised and access into the bin is improved.
Unused bins may be lowered for loading during a run by
pressing the grey button.
Slide the stock into the bin, centralising it between the
two locating pins in the base of the bin which should be
slid inwards to meet the edge of the paper stack. Ensure
Load sheets
face up
#1
#2
#3
#3
#2
#1
Load sheets
face down