Watkiss Vario, Operating Manual

Page: 35 / 110

31
air. Moving the lever towards you so that it is parallel with
the sidelay shuts off the air.
Too much air into the side of the stack can cause the
paper to skew as it feeds. Any bins that are not being
used should have the air tap shut off on the sidelay to
preserve overall system air. Remember to open the tap
when the bin is next used.
BIN LINKING If required, two or more feed bins may be linked to operate
as a single bin. When one runs out of stock, the next bin
in the linked group will automatically take over. This allows
reloading without stopping the machine. Bin linking can
only be enabled when the bins are unlocked i.e. when the
TEST SET
icon is highlighted on the control panel. Press
the grey button on the upper bin to link it with the one
below. This will be indicated by the small green light. The
Vario outline diagram on the control panel will show a
broken line between bins that are linked.
By pressing the red bin on/off button it is possible to select
which bin in the linked group is active (unless
PRENUMBER
in the
BASIC
window is selected).
If the system is locked, pressing the grey button on any
bin will indicate which bins are in the same linked group.
SENSOR OVERRANGE Sensor overrange is indicated after the test set by a slow
flashing red light on the bin in question.
Air Separation
Adjustment