Watkiss Vario, Operating Manual

Page: 19 / 110

15
If you are running mixed stocks on friction bins, individual
air taps on each bin allow the air to be independently
controlled.
PRESET PRESET
is used if an exact number of sets are required.
Touch
PRESET
and enter the number of sets required on
the number pad. The counter in the main area of the
screen will turn white.. When the machine is started the
counter will automatically count down to zero and the
collator will then stop.
Touch to restart the machine. The counter will revert
to black and will count up to show how many ’overs’ are
produced.
The Preset function is ideal for producing a one-off batch.
If you wish to produce several identical batches, it is
easier to use the Batch function.
PRENUMBER PRENUMBER
is intended for use when collating pre-
numbered carbonless sets. Touching
PRENUMBER
se-
lects Single Set mode, disables the Divert function and
causes the test set to be counted by the counter. It also
prevents the operator from switching linked bins before
one bin has emptied.
It is possible to switch off Single Set mode once Prenum-
ber is selected. This allows the machine to run faster when
using stock that feeds easily.
DIVERT DIVERT
causes any faulty sets to be diverted without
stopping the collator (floor standing models only). Faulty
sets are not counted by the counter. The
DIVERT
com-
mand is not available when in
PRENUMBER
mode or when
feeding to the rear.
OSCILLATE OSCILLATE
offsets the collated sets if an X-Jogger or
Oscillating Bench Base is fitted.