Watkiss Vario, Operating Manual

Page: 77 / 110

73
11
Maintenance
SERVICE INTERVAL It is recommended that your Vario is serviced by an
approved Watkiss engineer at six month intervals. Please
contact your Watkiss supplier or the manufacturer for
further details.
OPERATOR
MAINTENANCE
As with all machinery, your Vario will benefit from periodic
cleaning of general accumulations of paper dust, ink etc.
Other operator maintenance is detailed below.
CLEANING THE
TOUCH SCREEN
The touch screen should only be cleaned with a clean,
dry cloth. Abrasive materials and chemicals should never
be used to clean the screen.
Light pressure with a suitable cloth should be sufficient
to remove fingerprints. Do not use excessive force.
CONVEYOR WHEELS The conveyor wheels should be cleaned periodically to
remove any accumulations of ink etc. The cleaning inter-
val depends upon the usage level and stock character-
istics.
• Remove the rear guard by lifting up and out.
• Turn the black conveyor wheels by hand whilst clean-
ing with a cloth dampened with soapy water.
FRICTION FEED BINS Paper Separators (P/No 909-485)
There is one paper separator located in the centre of each
friction feed bin. It slots into the aluminium pick-up man-
ifold immediately beneath the central feed wheel. They
should be cleaned if dirty and replaced when worn. The
Conveyor
Wheel