Watkiss Vario, Operating Manual

Page: 15 / 110

11
5 seconds, the conveyor continues to run. The pause time
can be altered on the Machine Options page.
END JOB
Touch
END JOB
when you want to set the machine up for
a new job, or alter an existing job. When a job is loaded,
some of the machine settings cannot be changed, to
prevent accidental changes.
END JOB
unlocks these
settings.
This only affects settings that change the integrity of the
job, e.g. the number of sheets in a set, or the number of
sets in a batch.
TEST SET
When the test set icon is highlighted, the collator is ready
to run a test set. The Vario uses the test set to calibrate
the system according to the stock in each bin. The test
set is not counted by the counter (except when in pre-
number mode). Once the test set is completed and is
accepted by starting the machine, the bins and certain
functions cannot be changed, to prevent errors and
accidental button pushes.
To run a test set:
• Load the collator
• Touch the
button
• The collator will feed a single sheet from each bin that
is switched on and loaded
• If an error occurred during the test set, or the bin
loading is changed at this stage, touch to run another
test set
• When the test set icon is grey, the machine is ready to
run. Touch
If either the
TEST SET
or
END JOB
button is touched,
another test set will need to be run before the job can be
restarted: the test set icon will be highlighted.
If you are having trouble running a job and false errors
are being reported, it may help to run another test set.
This can be done at any time to recalibrate the detector
system.
HELP
Touch
HELP
and then touch any area of the screen to
display the help text. Use the ’up’ and ’down’ arrows next
to the text to scroll up or down the screen.