Watkiss Vario, Operating Manual

Page: 6 / 110

2
Emergency Stop
The emergency stop button should only be used when
an immediate stop of the machine is required. Under
normal circumstances the machine should be stopped
by touching the stop button on the control panel. If the
emergency stop button is used, the collator will not restart
until the button has been released by turning clockwise.
INSTALLATION The installation of your Vario requires specialist knowl-
edge and should therefore only be carried out by a
Watkiss approved engineer.
MAINS INPUT The Mains input for the Vario is on the rear of the drive
unit. The collator must be plugged into a mains supply of
the correct voltage. Two fuses are fitted next to the Mains
input. If either of the fuses fails the collator will not power
up (see p.85 for details about changing fuses).
MAINS ON/OFF
SWITCH
The mains On/Off switch should be used to turn the
collator on and off when required. When the collator is
Mains ON/OFF Switch
Emergency Stop
Mains Input and Fuses