Watkiss Vario, Operating Manual

Page: 20 / 110

16
THE ‘ADVANCED’
WINDOW
The
ADVANCED
window allows advanced machine set-
tings to be altered. These settings may be altered to
optimise the quality and productivity of a job.
DRIVE SPEED DRIVE SPEED
alters the drive speed of the conveyor
rollers and therefore the speed at which the sheets exit
the collator. Certain stocks will stack better if the drive
speed is adjusted to suit. This setting is independent from
the
SETS PER HOUR
setting. The default factory setting
is 80%.
STAGGER
(Two Tower only). When
STAGGER
is selected, the col-
lated set from Tower B delivers ahead and separately
from that of Tower A. This allows for better jogging of sets
with a lot of sheets. Stagger is only available when feeding
into a jogger.
SHEET OFFSET SHEET OFFSET
shales the sheets as they exit. This can
assist the neat stacking of thick sheets or large sets. The
range of offset is +/- 20mm between each sheet and
affects all bins. The default sheet offset is 0: this causes
the sheets in a set to exit the collator with their leading
edges level.
‘ADVANCED’ Window.