Watkiss Vario, Operating Manual

Page: 63 / 110

59
8
Floor Base
Three different bases are available for the Vario, a bench
base, an oscillating base and a floor base. If your machine
is fitted with a bench base, please refer to Section 6. If
your machine is fitted with an oscillating bench base,
please refer to Section 7.
The floor base is required to operate the Deep Pile Stacker
or a booklet maker. The floor base must be used with a
jogger or one of the above modules as it does not have
an integral stacker.
Interface Sockets
The interface sockets are located on the right underside
of the floor base, below the front air control (see diagram
below). There are four sockets in all. One each for the
Deep Pile Stacker, booklet maker, Twin Tower Link/Inline
Tower Link and jogger. Each type of socket will only
accept the correct interface cable.
Remote
Air Tap
Air Blast
Front Feedout
Conveyor
The Floor Base
Socket
Control
Tray
Paper Guides
Front Feedout
Conveyor Release
Lever
Supply
Divert Catch