Watkiss Vario, Operating Manual

Page: 75 / 110

71
• Push the red spring firmly to the left until it clicks into
place on the cartridge. It is essential that the cartridge
is securely held
Each staple cartridge holds 5,000 staples. When it is
nearly empty,
Staples Low
is displayed on the control
panel. This operates from an inbuilt counter, therefore if
a staple cartridge is changed when it is only part used,
the staple counter will need resetting (see below).
Resetting the Staple Counter
Remove the side cover from the machine by releasing the
securing screw, located in the centre, bottom inside edge
of the cover, and then lifting the cover up and away. Press
and hold the manual feed button whilst the stapler triggers
and continue to hold until the red light goes out.
Red Retaining Clip
Manual Feed Button