Watkiss Vario, Operating Manual

Page: 79 / 110

75
• Replace the shaft.
• Select
CLEANING
in the
MENU, USER SETTINGS
win-
dow and press the red button on the bin controls to
turn the feed wheel shaft. Visually check that each
wheel runs true. To straighten a wheel, gently hold a
flat edge against the wheel whilst it turns.
SUCTION FEED BINS Suckers (P/No. 330-035)
In the event that unexplained misfeeds are occurring it is
possible that the sucker cups have become worn or
damaged and should be replaced. The frequency will
depend upon the usage of the machine and the type of
material being collated.
• Select
CLEANING
in the
MENU, USER SETTINGS
win-
dow.
Important
Do not use any of the following chemicals to clean the
separators, feed wheels or conveyor wheels:
• Cleaners based on esters and ketones, e.g ethyl or
butyl acetate esters or methyl ketone (MEK).
• Aliphatic solvents, e.g. petrol or SBP1.
• Aromatic solvents/cleaners, e.g. toluene xylene,
napthas.
• Chlorinated solvents/cleaners, e.g. trichloroethyl-
ene, perchloroethylene genclenes.
All of these chemicals will damage the separators, feed
wheels and conveyor wheels to a varying degree
resulting in poor performance and premature failure.
Suction Manifold Showing Correct
Sucker Fitment