Watkiss Vario, Operating Manual

Page: 40 / 110

36
or when is touched after the machine stops for any
reason.
Switching Bins On & Off
Before a test set is produced, individual bins will auto-
matically switch on and off as they are loaded and
unloaded. Bins can also be manually selected by
pressing the red button alongside the bin. In addition,
loading the Default Template will switch on all loaded bins.
Remember that bins cannot be switched on or off when
the system is locked (touch
END JOB
if necessary).
ADJUSTMENTS There are three adjustments to the feed system which
allow the collation of a wide range of papers.
Sheet Corrugation
The profile of the suction feeder can be adjusted to
provide varying amounts of corrugation in the sheet.
Greater corrugation gives greater separation; less corru-
gation gives less separation.
Adjustment is via the knob on the right hand side of the
suction feeder. The indicator line on the knob shows the
degree of adjustment. The knob is infinitely adjustable
between the limits of its travel. When the indicator line on
the knob is in the fully up position there is no added sheet
separation. The fully down position produces maximum
separation.
In general the heavier the sheet the less added separation
is required. The mid position is suitable for most paper
Suction Feeder
Suction Feed Angle
Adjustment
Sheet Corrugation
Adjustment