Watkiss Vario, Operating Manual

Page: 46 / 110

42
the front of the machine and run parallel with the manifold.
The suckers produce the corrugation in the sheet which
ensures effective sheet separation (see x-section below).
Whilst doing this, check that all the sucker cups are
undamaged and that they are correctly seated (see p.75).
Repeat this procedure for all bins.
Edge Flick Control
This controls the depth of the edge flick. For most mate-
rials it should be in the mid-position. If more separation
is required (e.g. when the feed edge of the stock is curled
up), increase the depth of the edge flick by moving the
control downwards. If less separation is required (e.g.
heavy card stock), decrease the depth of the edge flick
by moving the control upwards.
Stock to be Collated
TOP
Taps
BOTTOM
Plugs
X-Section
PN 310-589, Rubber (VSCN) Manifold Plug Closed
PN 310-537, Plastic Mould (VSCN) Manifold Plug Open
Edge Flick
Control