Configuration File Parameter Guide
375
ET685 Administrator and Provisioning Manual
Values:
blind, attended
Default:
blind
Setting:
transfer_on_hangup
Description:
If you want to transfer two calls by placing the handset onhook (one
incoming call and one outgoing call), you can switch it on here.
Values:
on, off
Default:
off
Setting:
transfer_on_hangup_non_pots
Description:
If you want to transfer two calls by placing the handset onhook
(independent of call direction (incoming / outgoing): that will be not a Plain
Old Telephone Service "pots") , you can switch it on here. Condition:
"transfer_on_hangup" must be set to "on".
Values:
on, off
Default:
off
Setting:
transfer_on_hangup_with_starcode
Description:
If setting 'transfer on hangup' is set to on and the first call was picked up
with a PBX starcode then the transfer will be done if this setting is set to
on. Info: a picked up call with starcode is an outgoing call. But an incoming
and an outgoing call is the condition for the 'transfer on hangup'.
Values:
on, off
Default:
off
Setting:
uboot_lock
Description:
Internal
The uboot lock feature allows to protect the phone from using the
uboot/rescue mode update/reset mechanism by unknown users.
Values:
Integer
Default:
blank