Configuration File Parameter Guide
308
ET685 Administrator and Provisioning Manual
Default:
off
Setting:
mailbox_active
Description:
If this setting is on, the Retrieve button will dial the mailbox of the active
line. Otherwise the mailbox associated with the first MWI message in the
queue is used.
Starting with fw.versions 8.7.3.18 / 8.7.4.6 this setting also changes which
type of status-msg is used for signaling messages on PBX. When set to
on, the statuses CurrentIdentityHasTextMessages and
CurrentIdentityHasVoiceMessages are used. When set to off the statuses
PhoneHasTextMessages and PhoneHasVoiceMessages are used. I.e.
changing this setting will automatically change the status-msg controlling
settings: status_msgs_that_show_directly,
status_msgs_that_are_essential, status_msgs_that_are_blocked and
status_msgs_that_are_important
Values:
on, off
Default:
on
Setting:
max_boot_delay
Description:
On reboot, the phone waits for a random number of seconds not exceeding
the value set in this field, and then continues to boot up. This is to prevent
DOS by provisioning servers etc. by preventing all the phones (that are
rebooting) to send requests simultaneously in a given setup.
Values:
Integer
Default:
0
Setting:
max_dialed_calls
Description:
Defines how many dialed calls the phone keeps track of (size of redial-list).
There are also settings for received, missed and parked calls - see
settings: max_received_calls, max_missed_calls, and max_parked_calls.
Values:
Integer >=0
Default:
30
Setting:
max_forwards
