![VTech ET685 Administrator And Provisioning Manual Download Page 275](http://html1.mh-extra.com/html/vtech/et685/et685_administrator-and-provisioning-manual_1054367275.webp)
Configuration File Parameter Guide
275
ET685 Administrator and Provisioning Manual
Description:
Configures the IPv4 conflict detection module according to RFC 5227.
Normally there is no need the change the default behaviour.
- detect_defend: the phone detect possible conflicts before using the
selected IPv4
- address and after using it defends the address via arp announcements.
- detect_only: the phone detect possible conflicts before using the selected
IPv4 address only
- defend_only: the phone defends the address via arp announcements
only
off: the IPv4 conflict detection module is disabled.
Changes to this setting will only affect after a reboot of the phone.
Values:
off, detect_only, defend_only, detect_defend
Default:
detect_defend
Setting:
is_voice_identity
Description:
When this is disabled, invites for audio-calls will not be accepted by this
identity. A non-voice-identity will automatically force setting hide_identity to
be enabled.
Values:
on, off
Default:
on
Setting:
keepalive_interval
Description:
Specifies the number of seconds after which a new keepalive message will
be sent out to the Registrar/Proxy port in order to have the port stay open
and the phone remain reachable.
Values:
Integer
Default:
blank
Setting:
key_0_remapped