Configuration File Parameter Guide
334
ET685 Administrator and Provisioning Manual
Description:
You can provide one or several of the below values space separated in
order to reset only network, SIP stack, user, function key, speeddial related
or other settings.
Values:
main, net, stack, user, fkey, speeddial, phonebook
Default:
blank
Setting:
restrict_uri_queries
Description:
By default, if setting admin_mode_password and http credentials (settings
http_user and http_pass) are set and hidden tags are activated (setting
use_hidden_tags), then query strings in URIs (the part after the "?") are
restricted to a very limited number of cases.
By setting restrict_uri_queries to false, query strings are not restricted
anymore, so you can use hidden tags and passwords, even if you need
stuff like "dummy.htm?settings=save&...".
Values:
on, off
Default:
on
Setting:
retrieve_xferred_call_on
Description:
When a call is transferred, the transferred party sends notifications to the
tranferring party about the progess of the call towards the transfer target.
The notifications include the current SIP response code received by the
transferred party. This settings specifies at which point the transferring
party will deem the transfer failed and retrieve the transferred call (which
up to this point is still on hold). This occurs when the reported SIP
response code is equal to or greater than the value of this setting. This
setting should be administered in tandem with the setting
release_xferred_call_on.
Note that when marking a call with save transfer the phone will ignore the
actual setting value and instead act as if this was set to 200.
Values:
SIP response code
Default:
400
Setting:
retry_after_failed_register
