Configuration File Parameter Guide
316
ET685 Administrator and Provisioning Manual
Setting:
number_sign_encoding
Description:
RFC 3261 states that the number sign (#) must be encoded inside a
telephone subscriber. Therefore the default value of the setting is 'on'.
Change it to 'off' if you need special cases for direct dialing and therefore
not encoding the #.
Values:
on, off
Default:
on
Setting:
number_simultaneous_calls
Description:
Overrides the default maximum of simultaneous calls.
Values:
Integer or off
Default:
off
Setting:
ocip_max_hits
Description:
This setting specifies the maximum number of search results to be
returned by the OCI-P server. Please note that a very large value of the
Max. Hits will slow down the OCI-P lookup, therefore the setting should be
configured according to the available bandwidth. The default value for this
setting is 50.
Values:
Integer
Default:
50
Setting:
ocip_password
Description:
This setting specifies the OCI-P server password.
Values:
String
Default:
blank
Setting:
ocip_port
Description:
This setting specifies the OCI-P server port.
Values:
integer or blank
