![VTech ET685 Administrator And Provisioning Manual Download Page 198](http://html1.mh-extra.com/html/vtech/et685/et685_administrator-and-provisioning-manual_1054367198.webp)
Configuration File Parameter Guide
198
ET685 Administrator and Provisioning Manual
Setting:
auth_tmp_realm
Description:
Internal
This setting holds temporarily used data which should not be set or
changed by any means. This setting cannot be provisioned.
Values:
Do not change the vaue of this setting.
Default:
empty
Setting:
auto_connect_indication
Description:
If you want to become informed with an audible indication when an
incoming call (intercom call too) is automatically answered by your phone,
select “on”.
Values:
on, off
Default:
on
Setting:
auto_connect_indication_tone
Description:
Optional specify the autoconnect indication tone
Builtin value is "528 500 100 1", where the
first value is the frequency in Hz,
second value is the duration the tone will be played (milliseconds),
third value is the duration the tone won't be played (milliseconds),
fourth value is the loop count, starting by 1 (played one time).
Values:
{integer, integer, integer, integer}
Default:
blank
Setting:
auto_dial
Description:
This setting is switched off by default. You can set a timeout (in seconds)
after which a number is dialed automatically without pressing or taking the
handset off the hook.
Note:
Apart from the predefined values in the drop-down form, you can
set other values either through provisioning or single HTTP GET
requests.
Values:
off, integer
Default:
3