manualshive.com logo in svg

VTech ET685, Administrator And Provisioning Manual

Share
Download
VTech ET685 Administrator And Provisioning Manual Download Page 377

Configuration File Parameter Guide

377

Back to Contents

ET685 Administrator and Provisioning Manual

Description:

auto_update (Update automatically: load settings from settings server, but 
the user is not prompted to acknowledge the update, means full automatic 
provisioning)

ask_for_update (Ask for update: load settings from settings server and the 
user is prompted to acknowledge the update)

settings_only (Never Update, load settings only: load settings from 
settings server only, no update is initiated, means update disabled)

never_update (Never Update, do not load settings: do not load any 
settings or updates from settings server at all, means provisioning 
disabled)

never_update_firm (deprecated since v6.0)

never_update_boot (deprecated since v6.0)

Attention: update_policy affects all downloaded files: with never_update 
value the phone will not download any files (VPN config tarball, language 
files, etc..)

Values:

auto_update, ask_for_update, settings_only, never_update

Default:

settings_only

Setting:

update_server

Description:

SYSTEM INTERNAL

If the DHCP parameter is enabled and the supported DHCP options have 
been received in the DHCP offer :

The value found in 

Option 66 

will be stored in parameter 

update_server, e.g. http://server

The value found in 

Option 67 

will be stored in parameter 

update_filename, e.g. vtech/vtech.xml

Values:

URL

Default:

blank

Setting:

upload_font

Summary of Contents for ET685









































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands