VTech ET685 Administrator And Provisioning Manual Download

Page: 52 / 424

Provisioning

Back to Contents

ET685 Administrator and Provisioning Manual

Manual Software Update

You can manually update the software of your phone by following these steps:

1. On a web browser, visit

businessphones.vtech.com

and open the ET685 downloads

page.

2. Read any release notes that are available.

3. Copy the URL link to the firmware update file.

This will be a .bin file. For example: VTechET685-SIP-8.10.1.11-0-SIP-r.bin

4. Open the ET685 WebUI interface, and open the

Software Update

page.

5. In the

Firmware

field, paste the link to the firmware update file

6. Click

Load

Your ET685 phone reboots and starts the software update.

Note:

Do not disconnect the power at any time during this process!

7. After your phone has finished the software update, check the firmware version.



From the WebUI: open the

System Information

page.

The Firmware-Version is displayed on the page.

For example, VTechET685-SIP-8.10.1.11-0



From the phone menu:



In Administrator mode: Select

6 Information

2 System info



In User mode: Select:

5 Information

2 System Info

The firmware version is displayed in the first line of the display.

For example, VTechET685-SIP-8.10.1.11-0

Summary of Contents for ET685









































































































































































































































































































































































































































Search results

Summary of Contents for ET685

Reviews:

Related manuals for ET685

Brands by name

Popular brands

VTech ET685, Administrator And Provisioning Manual

Search results

Summary of Contents for ET685

Reviews:

Related manuals for ET685

Brands by name

Popular brands