VTech ET685, Administrator And Provisioning Manual

Page: 168 / 424

Web User Interface (WebUI) Reference 168
Back to Contents
ET685 Administrator and Provisioning Manual
Update Policy Select the update policy you wish to adopt for your phone.
(Only applicable when using mass deployment).

“ Update automatically ”: load settings from settings
server, but the user is not prompted to acknowledge
the update, means full automatic provisioning.

“ Ask for update ”: load settings from settings server
and the user is prompted to acknowledge the
update.

“ Never Update, load settings only ”: load settings
from settings server only, no update is initiated,
means update disabled.

“ Never Update, do not load settings ”: do not load
any settings or updates from settings server at all,
means provisioning disabled.
Attention: update_policy affects all downloaded files: with
“
Never Update, do not load settings ” value, the phone will
not download any files (VPN config tarball, language files,
etc.)
Setting URL Enter the URL of the settings server from where you would
like to obtain the configuration file to configure your phone.
Settings refresh timer If a value greater than 0 is set (=number of seconds) the
phone configuration will be requested from the setting
server after the time has elapsed. After fetching the settings
from the setting server URL they will be applied and the
timer will be reset to the latest received value.
PnP Config If turned to on, the phone will try to retrieve its settings via a
Plug-and-Play (PnP) Server. Modern SIP PBXs/Proxys can
provide the PnP configuration data for the VTech phones.
Please refer to the manual of your PBX/Proxy. If the PnP
configuration fails, the phone will try to get the settings from
a setting server.
Prov Polling If set to “on”, automatic periodic provisioning server polling
for upgrades is enabled.
Setting Description