VTech ET685 Page 64 Administrator And Provisioning Manual Download

Page: 64 / 424

Phone Menu Reference

Back to Contents

ET685 Administrator and Provisioning Manual

Using the Network menu

In Administrator mode, you can configure network settings on the

4 Network

phone menu.

IP Settings menu

Use this menu item to Internet Protocol (IP) settings for the phone.

NOTE:

After changing these settings, you must reboot your phone.

IPv4 settings

1. Press

4 Network

1 IP Settings

1 IPv4

To turn on DHCP:

Select

1 DHCP

until the slider is on

and “On” is displayed.

–OR–

To turn off DHCP:

Select each of the following menu items from the list, and enter the

required information.



1 DHCP

- Select until the slider is off

and “Off” is displayed.

This will turn off DHCP.

Summary of Contents for ET685









































































































































































































































































































































































































































Search results

Summary of Contents for ET685

Reviews:

Related manuals for ET685

Brands by name

Popular brands

VTech ET685, Administrator And Provisioning Manual

Search results

Summary of Contents for ET685

Reviews:

Related manuals for ET685

Brands by name

Popular brands