manualshive.com logo in svg

VTech ET685, Administrator And Provisioning Manual

Share
Download
VTech ET685 Administrator And Provisioning Manual Download Page 149

Web User Interface (WebUI) Reference

149

Back to Contents

ET685 Administrator and Provisioning Manual

Handle Active Identity 
Mailbox only

If this setting is on, the Retrieve button will dial the mailbox 
of the active line. Otherwise the mailbox associated with the 
first MWI message in the queue is used. Starting with 
fw.versions 8.7.3.18 / 8.7.4.6 this setting also changes 
which type of status-msg is used for signaling messages on 
PBX. When set to on, the statuses 
CurrentIdentityHasTextMessages and 
CurrentIdentityHasVoiceMessages are used. When set to 
off the statuses PhoneHasTextMessages and 
PhoneHasVoiceMessages are used. I.e. changing this 
setting will automatically change the status-msg controlling 
settings: status_msgs_that_show_directly, 
status_msgs_that_are_essential, 
status_msgs_that_are_blocked and 
status_msgs_that_are_important

Return to idle screen on 
offhook

If this setting is on, the phone will go to idle state even when 
the handset is offhook i.e. it will not prompt the user to dial 
a new number.

Dial prompt on offhook

If this setting is on, the phone will offer a dial prompt when 
the handset goes offhook. Otherwise the phone stays in idle 
state.

Watchdog

The watchdog will watch your phone, if the phone will 
freeze, the watchdog initiates a hard reboot of the phone. 
This watchdog is based on the linux software watchdog.

Prioritise Asserted

SIP messages like INVITE may include asserted 
information (p-asserted-identity). If this setting is enabled, 
the phone displays the name provided by the asserted 
information with the highest priority. Only if no asserted 
information is given the priority defined by the related setting 
contact_source_priority will be considered.

Go to Call-Monitor on 
Activity

When any of your monitored lines shows an activity (other 
than idle), the phone will automatically display the 
call-monitor state. This behaviour is simular to the setting 
Call Pickup and replaced it since version 8.7.2 on all phones 
models. See also 
pui_states_allowing_state_switch_on_activity and 
goto_virtual_keys_state_on_activity.

Setting

Description

Summary of Contents for ET685









































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands