Configuration File Parameter Guide
404
ET685 Administrator and Provisioning Manual
Values:
on, off
Default:
off
Setting:
using_server_managed_fwd_time
Description:
If this setting is "on" the server will be responsible for handling the redirect
on timeout functionality. From the call perspective the phone will act as if
no redirect was set (all is managed by the server).
since 8.7.4:
The PUI will show the current setup if the server synchronizes it's values
with those on the phone (settings fwd_all_enabled, fwd_all_target and
fwd_time_secs). This setting does not specify how the server changes the
redirection values nor how the phone updates them. (it may be done via
TR69, DFKS or starcodes).
Before 8.7.4:
The phone user will see the value from settings
server_managed_fwd_time_state, server_managed_fwd_time_nr and
server_managed_fwd_time_secs as the current redirect on timeout state,
and this value can be changed at anytime by the server.
This setting does not specify how the server changes the value of settings
server_managed_fwd_time_state, server_managed_fwd_time_nr and
server_managed_fwd_time_secs nor how the phone updates them (it may
be done via TR69).
Values:
on, off
Default:
off
Setting:
utc_offset
Description:
SYSTEM INTERNAL
Signed UTC offset in seconds. This value is retrieved automatically from
the timezone configuration. Usually there will be no need to change this
setting.
Values:
Integer
Default:
blank
Setting:
uxm_count
