Configuration File Parameter Guide
245
ET685 Administrator and Provisioning Manual
Description:
This setting describes which soft keys are shown when phone displays the
dial screen.
- This setting is available on all models with a screen.
- The function keys are listed in order from left to right. Example: With the
setting "F_DIALMODE F_BACK", the edit mode function key is shown on
the first position from the left, the Backspace key on the second one.
- Some function keys are automatically hidden when they are of no use
under current circumstances. Example: F_REDIAL will not be shown when
there are no numbers in the redial-list.
- It is possible to restrict each function key to certain conditions
(edit_for_transfer: entering target for a blind transfer, have_incoming_call:
there is an incoming ringing call, have_only_connected_calls: all the calls
on the device are in connected state (i.e. in a single 1o1 call or a
conference) or have_multiple_established_calls[since 8.7.5.9]: more than
1 call on the device is in connected or holding state). For example, if you
want a function key to be available only when there is an incoming ringing
call, add the keyword to the function key settings in parentheses, e.g.
"F_WHATEVER(have_incoming_call)".
--It is also possible to negate this by placing the operator "not" up front. For
example, "F_WHATEVER(not:have_incoming_call)" only shows the
function key when there isn't an incoming ringing call.
--You may also combine the keywords like this:
"F_WHATEVER(edit_for_transfer,not:have_incoming_call)". In this case
the key only shows when you are either entering the target for a blind
transfer or there isn't an incoming ringing call.
--Attention: Use spaces only to separate the function keys. Do not use
them before or inside the brackets or parentheses.
Related settings:
call_screen_fkeys_on_incoming
call_screen_fkeys_on_outgoing
call_screen_fkeys_on_connected
call_screen_fkeys_on_holding
Values:
space separated list of F keys
Default:
F_DIALMODE F_BACK F_DEFLECT(not:edit_for_transfer)
F_ACCEPT_CALL(not:edit_for_transfer)
F_SAFETRANSFER(edit_for_transfer) F_CONTACTPOOL F_REDIAL
